CoovaAP Firmware Installation

WARNING: Flashing any third party firmware on your router may VOID the original manufacturer's warranty. Software found on this site comes WITHOUT any warrany and can only be USED AT YOUR OWN RISK.

Step 1

Ensure that the Linksys has a recent Linksys firmware and you are already able to reach the Internet. If you are not using the default settings of the router, it is advised that you go to Administration / Config Management and backup your current settings and then to Administration / Factory Defaults to reset the firmware to the factory defaults. It is assumed that the Linksys uses DHCP when connecting to the Internet.

Download version 1.0-beta.12

• Raw broadcom trx image *
• Linksys WRT54GL
• Linksys WRT54G **
• Linksys WRT54GS ***
• Linksys WRT54GS v4 ***
• Other devices

* For Upgrading CoovaAP and other devices.

** Linksys WRT54G hardware versions 1 through 4 (NOT version 5) with serial number starting with "CDF0" through "CDF9" or "CDFA".

*** Linksys WRT54GS hardware version 1 through 4 (NOT version 5) with serial number starting with "CGN0" through "CGN6".